LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> Sierra 2500 HD, 2D Pickup, 6.6 1, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the cooling fan. Refer to Fan Replacement in Cooling System.
    2. Fig 1: View Of CMP Sensor Electrical Connector & Cooling Fan Pulley
    GM742170Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the camshaft position (CMP) sensor connector (1).
  3. Remove the cooling fan pulley (2). Refer to Fan Pulley Replacement in Cooling System.
  4. Remove the CMP sensor retaining bolt.
  5. Remove the CMP sensor.
scientia non olet · About LEMON Manuals