Installation Procedure

Fig 1: View Of Accelerator Cable Tangs, Pedal Lever & Cable Retainer

Courtesy of GENERAL MOTORS COMPANY

Install the accelerator pedal.
Install the end bushings to the pivot shaft.
Install the end bushing retaining clips.
Install the accelerator cable through the slot in the accelerator pedal lever (2).
Seat the retainer (3) in the accelerator pedal lever (2).
Test for complete throttle opening and closing range by operating the accelerator pedal. Also inspect the carpet fit under the accelerator pedal. The throttle should operate freely and without binding between full closed throttle and wide open throttle (WOT).
Install the left instrument panel insulator.