LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Controls - 8.1L - Repair Instructions) >> Repair Instructions >> Exhaust Gas Recirculation Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install a new gasket (3) on the EGR adapter bracket.
    2. Fig 1: Identifying EGR Valve Assembly
    GM717186Courtesy of GENERAL MOTORS COMPANY
  2. Refer to FASTENER NOTICE in Cautions and Notices.

    Install the EGR (2) valve and two nuts (1).

    Tighten 

    Tighten the nuts to 22 N.m (16 lb ft).

  3. Connect the EGR valve electrical connector.
scientia non olet · About LEMON Manuals