Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Auxiliary Battery) , Battery Negative Cable Disconnection and Connection (Single Battery) in Engine Electrical.
- Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
- Remove the air duct adapter stud.
- Remove the cruise control cable.
- Remove the accelerator cable.
- Remove the nuts retaining the accelerator cable routing bracket.
- Position bracket aside.
- Remove the accelerator cable bracket nuts and bracket.
- Position bracket aside.
- Disconnect the IAC valve harness connector.
- Disconnect the TP sensor harness connector.
- Remove the throttle body retaining studs.
- Remove the throttle body assembly.
- Discard the throttle body seal.