LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls - 4.3L - Repair Instructions) >> Repair Instructions >> Ignition Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Ignition Control Module Assembly
    GM690078Courtesy of GENERAL MOTORS COMPANY
  1. Refer to FASTENER NOTICE in Cautions and Notices.

    Install the ignition control module (2) and the heat sink (1) on the bracket with the 2 screws (4).

    Tighten 

    Tighten the screws to 3.5 N.m (31 lb in).

  2. Reconnect the electrical connectors (3).
scientia non olet · About LEMON Manuals