LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Controls - 4.3L - Repair Instructions) >> Repair Instructions >> Accelerator Control Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
    2. Fig 1: Accelerator Cable Routing Bracket
    GM26764Courtesy of GENERAL MOTORS COMPANY
  2. Remove the accelerator cable from the cable routing bracket.
    3. Fig 2: Identifying Accelerator Cable/Throttle Body Lever
    GM325556Courtesy of GENERAL MOTORS COMPANY
  3. Remove the accelerator cable from the throttle body lever.
    4. Fig 3: Expanded View Of Accelerator Cable From The Engine Cable Bracket
    GM325557Courtesy of GENERAL MOTORS COMPANY
  4. Remove the accelerator cable from the engine cable bracket.
    5. Fig 4: View Of Accelerator Cable Tangs, Pedal Lever & Cable Retainer
    GM372959Courtesy of GENERAL MOTORS COMPANY
  5. Remove the left instrument panel insulator.
  6. Disconnect the accelerator cable retainer (3) from the accelerator pedal lever (2).
  7. Squeeze the accelerator cable cover tangs (1) and push the cable through the bulkhead.
  8. Remove the accelerator cable.
scientia non olet · About LEMON Manuals