Installation Procedure

Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt

Courtesy of GENERAL MOTORS COMPANY

Install the CMP sensor.
Refer to FASTENER NOTICE in Cautions and Notices.
Install the CMP sensor bolt.
Tighten

Tighten the bolt to 25 N.m (18 lb ft).
Connect the CMP sensor electrical connector.
Install the engine sight shield, if required. Refer to Upper Intake Manifold Sight Shield Replacement (6.0 L w/RPOs Y91 and Z88) , Upper Intake Manifold Sight Shield Replacement (4.8 L, 5.3 L, and 6.0 L) in Engine Mechanical-4.8L, 5.3L, and 6.0L.