LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> Jimmy 4D Utility, RWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Analog Instrument Panels >> Programming >> Compass Calibration

Compass Calibration

  1. Turn ignition switch to ON position, then go to next step.
  2. Press MODE button in order to advance Driver Information Center (DIC) display to COMP/TEMP mode. When operation is complete, go to next step.
  3. Simultaneously depress and hold US/MET and MODE buttons for approximately 10 seconds. When DIC displays a "C", go to next step.
  4. Release both buttons, then go to next step.
  5. Drive vehicle in circles at speed of less tan 5 MPH while an assistant observes DIC display. When indication of "C" is replaced by correct compass heading, calibration is complete.
scientia non olet · About LEMON Manuals