Removal Procedure
- Open the liftgate.
- Remove the right of left side applique.
- Use safety glasses and gloves.
- Use the J 24402-A or J 39032 in order to remove the stationary window. Do this from inside the vehicle to protect the outer surface of the paint.
- If the original reveal molding on the quarter window is damaged it must be replaced.
- With the aid of an assistant, use the suction cups to remove the window from the opening.
IMPORTANT:
Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and inner trim around the window.
CAUTION:
Refer to GLASS AND SHEET METAL HANDLING CAUTION in Cautions and Notices.
IMPORTANT:
Keep the cutting edge of the tool against the stationary window. This will allow the urethane adhesive to be separated from the stationary window. Leave a base of urethane on the pinchweld flange. The only suitable lubrication is clear water.