Removal Procedure

Fig 1: Air Cleaner Inlet Elbow, Turbocharger Inlet Elbow & Clamp

Courtesy of GENERAL MOTORS CORP.

Loosen the clamp and separate the air cleaner inlet elbow from the turbocharger inlet elbow.

Fig 2: Air Cleaner Cover Clips

Courtesy of GENERAL MOTORS CORP.

Fig 3: MAF Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Fig 4: Air Cleaner Filter & Air Inlet Elbow

Courtesy of GENERAL MOTORS CORP.

Remove the air cleaner filter with air inlet elbow attached.
Separate the air inlet elbow from the filter by pulling apart.
- Inspect the CDR hose for cracks or binds.
- Inspect the air cleaner cover seals for damage.
- Inspect the air cleaner filter for damage or excessive dirt accumulation.
- A high capacity air filter can be used if necessary (AC type A 1306C).