Injection Lines
| Callout | Component Name |
|---|---|
| 1 | Cylinder 8 |
| 2 | Cylinder 7 |
| 3 | Cylinder 2 |
| 4 | Cylinder 6 |
| 5 | Cylinder 5 |
| 6 | Cylinder 4 |
| 7 | Cylinder 3 |
| 8 | Cylinder 1 |
The injection lines connect the high pressure discharge fittings on the head of the injection pump to the injection nozzles. The injection lines are pre-bent for correct routing and connect to the injection pump head as shown in the figure above. The injection lines are equal in length and interior volume.