LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Starter Heat Shield, Bolts, & Nuts
    GM747162Courtesy of GENERAL MOTORS COMPANY
  1. If equipped with a 8.1L engine, install the starter heat shield.

    Refer to FASTENER NOTICE in Cautions and Notices.

  2. Install the starter heat shield bolts, and nut.

    Tighten 

    • Tighten the starter heat shield bolts to 3 N.m (35 lb in).
    • Tighten the starter heat shield nut to 5 N.m (44 lb in).
    3. Fig 2: View Of Starter & Heat Shield
    GM663472Courtesy of GENERAL MOTORS COMPANY
  3. If equipped with a 4.8L, 5.3L, or 6.0L engine, install the starter heat shield.
  4. Install the starter motor. Refer to Starter Replacement (4.3 L Engine) , Starter Replacement (8.1L Engine) , Starter Replacement (6.6 L Engine) , Starter Replacement (4.8L, 5.3L, and 6.0L Engines) .
scientia non olet · About LEMON Manuals