LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> Yukon Base, 5.3 T, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window System - New Style >> Symptom Tests >> Test 3: Right Front Window Inoperative

Test 3: Right Front Window Inoperative

  1. Turn ignition switch to RUN position. Using a test light connected to ground, backprobe right window switch connector terminal "M" (Dark Green wire). See Figure . If test light illuminates, go to step  3 . If test light does not illuminate, go to next step.
  2. Repair open in Dark Green wire between right window switch connector terminal "M" and Left Bussed Electrical Center (LBEC) connector C1 terminal A9. See WIRING DIAGRAMS  . Repair as necessary and retest system.
  3. Disconnect right window motor connector. Connect a test light between right window motor connector terminals "A" (Dark Blue wire) and "B" (Brown wire). Observe test light while operating right window switch to UP and DOWN positions. If test light illuminates in both positions, go to next step. If test light does not illuminate in both positions, go to step  5 .
  4. Using a test light connected to battery voltage, backprobe right window switch connector terminal "G" (Black wire). If test light illuminates, go to step  6 . If test light does not illuminate, repair open in Black wire between ground and right window switch connector terminal "G". See WIRING DIAGRAMS  .
  5. Check for open in Dark Blue wire between right window switch connector terminal "A" and right window motor connector terminal "A". Check for open in Brown wire between right window switch connector terminal "F" and right window motor connector terminal "B". See WIRING DIAGRAMS  . Repair as necessary and retest system.
  6. Replace right window motor. See WINDOW MOTOR & REGULATOR  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals