MIL Operation
WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
The MIL is located on the Instrument Panel Cluster (IPC).
MIL Function
- The MIL informs the driver that a malfunction has occurred and the vehicle should be taken in for service as soon as possible.
- The MIL illuminates during a bulb test and a system test.
- A Diagnostic Trouble Code (DTC) will be stored if a MIL is requested by the diagnostic.
MIL Illumination
- The MIL will illuminate with the ignition on and the engine not running.
- The MIL will turn off when the engine is started.
- The MIL will remain on if the self-diagnostic system has detected a malfunction.
- The MIL may turn off if the malfunction is not present.
- If the MIL is illuminated and then the engine stalls, the MIL will remain illuminated so long as the ignition switch is on.
- If the MIL is not illuminated and the engine stalls, the MIL will not illuminate until the ignition switch is cycled off, then on.