Test K: Keyless Entry Does Not Program (Base)
- Disconnect Remote Control Door Lock Receiver (RCDLR). Using DVOM, check continuity between RCDLR connector terminal "L" (Black/White wire) and Data Link Connector (DLC) terminal No. 8. See Figure . If continuity exists, go to next step. If continuity does not exist, go to step 3 .
- Replace RCDLR. See REMOTE CONTROL DOOR LOCK RECEIVER under REMOVAL & INSTALLATION. After repair, recheck system.
- Repair open in Black/White wire between RCDLR and DLC. After repair, recheck system.