Front-End Discriminating Sensor: Removal
WARNING: This page is about a different car, the 2000 GMC Safari and 2000 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, See AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
- Remove Mass Air Flow (MAF) sensor. Remove air duct from throttle body. Remove upper fan shroud. Remove fan and clutch assembly. Remove lower fan shroud.
- Front-end discriminating sensor is located on front-end lower tie bar. Remove CPA clip and disconnect sensor harness connector. Remove sensor mounting fasteners. Remove sensor. See Figure.