LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 670 (Front Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new stud into the hub flange hole using firm hand pressure.
  2. Install 4 washers to the new wheel stud.
  3. Thread a wheel nut onto the new stud with the flat side facing the front hub flange.
  4. Tighten the lug nut until the stud contacts the back of the hub flange.
  5. Remove the wheel nut.
  6. Remove the washers.
  7. Install the brake rotor.
  8. Install the tire and wheel. Refer to TIRE & WHEEL REMOVAL & INSTALLATION .
  9. Remove the safety stands.
  10. Lower the vehicle.
scientia non olet · About LEMON Manuals