LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 670 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Place the insulators on the stabilizer shaft with the slits facing toward the front of the vehicle.

  1. Install the insulators (1) to the stabilizer shaft (4).
  2. Install the stabilizer shaft (4).
  3. Install the brackets (2) over the insulators and the stabilizer shaft.
  4. Install insulator bracket bolts (3).
    1. 4.1. Tighten the bolts to 33 N.m (24 ft lbs), 15 series.
    2. 4.2. Tighten the bolts to 50 N.m (39 ft lbs), 25/35 series.
  5. Install the stabilizer links. Refer to Stabilizer Shaft Link Replacement .
  6. Install the oil pan skid plate, if equipped. Tighten the oil pan skid plate retaining bolts to 20 N.m (15 ft lbs).
  7. Install the tire and wheel assembly. Refer to TIRE & WHEEL REMOVAL & INSTALLATION .
  8. Remove the safety stands
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals