LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1999 >> Forward Control 7.4 J >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Wheel Alignment Specifications & Adjustment Procedures - G Series Van) >> Jacking & Hoisting

Jacking & Hoisting

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1996 GMC Vandura Special, 1996 GMC Vandura, 1996 GMC Savana Special, 1996 GMC Savana Camper Special, and 1996 GMC Savana. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before performing wheel alignment, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See PRE-ALIGNMENT INSTRUCTIONS in WHEEL ALIGNMENT THEORY/OPERATION article in GENERAL INFORMATION.

Put floor jack or vehicle hoist under vehicle at proper lifting points. See Fig 1 . If raising vehicle on a twin-post hoist, do not damage suspension components, rear axle cover, or steering linkage.

Fig 1: Lifting Points
G90I04479Courtesy of GENERAL MOTORS CORP.