LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Yukon 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Supplemental Inflatable Restraint System) >> Testing - Diagnostic >> DTC B1026: Driver Deployment Loop Open >> Conditions For Setting DTC

Conditions For Setting DTC

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1998 GMC Savana Special, 1998 GMC Savana Camper Special, 1998 GMC Savana, 1998 Chevrolet RV Cutaway, and 1998 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

DTC sets when voltage difference between DRIVER HIGH terminal No. 2 and DRIVER LOW terminal No. 3 is greater than or equal to 400 millivolts for 500 milliseconds during DEPLOYMENT LOOP CONTINUITY, RESISTANCE MEASUREMENT, or CONTINUOUS MONITORING tests.

scientia non olet · About LEMON Manuals