LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Suburban K2500, 6.5 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine Controls - System & Component Testing - 4.3L) >> Miscellaneous Pcm/VCM Controls >> Transmission >> Converter Lock-Up Signal From PCM/VCM

Converter Lock-Up Signal From PCM/VCM

WARNING: This page is about a different car, the 1998 GMC Savana, 1998 Chevrolet Chevy Van, and 1998 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm engine to operating temperature. Raise vehicle and support drive wheels. Support suspension where necessary to prevent damage to drive axles.
  2. Connect a test light to battery voltage. Touch TCC control driver terminal with test light. Accelerate vehicle to 45 MPH and note test light. If test light does not illuminate, problem is a faulty PCM/VCM connector or PCM/VCM.
scientia non olet · About LEMON Manuals