Rear System
- Push rear window washer switch to WASH position. Washer should spray until switch is released. Wiper should continue to operate for approximately 3 cycles.
- Turn wiper/washer switch to LO position. Wiper should operate with approximately a 5 second delay between wipe cycles.
- Turn wiper/washer switch to HI position. Wiper should operate constantly at a faster speed.
SYMPTOM DIAGNOSIS
| Symptom | Perform Test No. | ||||
|---|---|---|---|---|---|
| Wipers Do Not Run In Any Mode | 1 | ||||
| Wipers Do Not Turn Off | 2 | ||||
| Wipers Do Not Run In LO Speed | (1) | ||||
| Wipers Do Not Run At All In HI Speed | 3 | ||||
| Wipers Run Only When Switch Is In HI Speed Setting, But Run At LO Speed | (2) | ||||
| Wipers Do Not Run In LO Speed, Delay, Or MIST Modes, But HI Speed Is Okay | 4 | ||||
| Delay Operates Incorrectly Or Not At All | 5 | ||||
| Wipers Stop Randomly Do Not Park In OFF Position | 6 | ||||
| Wipers Do Not Run When Washer Is Turned On | 7 | ||||
| Washer Does Not Operate | 8 | ||||
|
|||||