Starter & Solenoid

CAUTION: DO NOT clean starter in degreasing tank or with grease dissolving solvents. This will remove lubricant from clutch mechanism, and damage insulation on armature and field coil.

NOTE: When reassembling starter and solenoid, use Grease (10477431) for lubrication. Use of other greases may cause starter failure. Use illustrations for overhaul procedure. See Fig 1-Fig 4 .

NOTE: On PG260 starter motor, starter and solenoid are not overhauled and are replaced as a complete assembly.

Fig 1: Exploded View Of Delco-Remy Starter Motor (SD205 & SD255)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Exploded View Of Delco-Remy Starter Motor (SD260)

Courtesy of GENERAL MOTORS CORP.

Fig 3: Exploded View Of Delco-Remy Starter Motor (PG250)

Courtesy of GENERAL MOTORS CORP.

Fig 4: Exploded View Of Delco-Remy Starter Motor (28MT)

Courtesy of GENERAL MOTORS CORP.