LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Forward Control 7.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 882 (Wheel Alignment) >> Repair Instructions >> Front Toe Adjustment

Front Toe Adjustment

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position and lock the steering wheel with the vehicle with the wheels in the straight forward position.
    2. Fig 1: Identifying Tie Rod Inner Jam Nut
    GM854976Courtesy of GENERAL MOTORS CORP.
  2. Loosen both inner tie rod jam nuts.
    3. IMPORTANT: The inner tie rod must rotate freely from the boot seal surface. Do not allow the boot to rotate.
  3. Loosen the inner tie rod seal to boot surface.
  4. Use a wrench on the tie rod flats to increase or decrease the toe angle specifications. Refer to Wheel Alignment Specifications .
    5. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  5. Tighten the inner tie rod jam nuts.

    Tighten:  Tighten the jam nuts to 60 N.m (44 lb ft).

  6. Inspect the toe angle to ensure proper adjustment and adjust as necessary.
scientia non olet · About LEMON Manuals