LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Forward Control 4.3 W, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Controls - System & Component Testing - 6.5L Turbo Diesel) >> Fuel System >> Injectors >> Leakage Test

Leakage Test

WARNING: This page is about a different variant/trim than selected.
  1. Open tester shutoff valve 3/4 to 1 3/4 turns from closed position. Blow dry injector nozzle tip. Slowly depress tester lever until pressure gauge reads 1400 psi (98 kg/cm2 ). Maintain pressure for 10 seconds and observe injector nozzle tip.
  2. A drop may form on end of injector nozzle, but should not fall off within a 10 second period. Replace injector nozzle if a drop of test fluid falls from tip during 10 second period. See Fig 1. Release tester pressure.
Fig 1: Injection Nozzle Leakage Test
G90A15743Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals