LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1997 >> Jimmy 4D Utility, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Disabling & Activating Air Bag System

Disabling & Activating Air Bag System

  1. To disable air bag system, turn ignition switch to OFF position. Remove SIR fuse from fuse block. Disconnect Yellow SIR connector at base of steering column. On models equipped with passenger-side air bag, also disconnect Yellow connector under right side of instrument panel. INFLATABLE RESTRAINT indicator light will come on. This is normal.
  2. Wait 10 minutes before working on vehicle. All connectors used on SIR system use Connector Position Assurance (CPA) clips to ensure connector retention.
  3. To activate air bag system, turn ignition switch to OFF position. Connect Yellow 2-pin connector and CPA clip at base of steering column and/or under right side of instrument panel. Install SIR fuse. Turn ignition switch to RUN position. INFLATABLE RESTRAINT indicator light should go off. For more information, see AIR BAG RESTRAINT SYSTEM article in ACCESSORIES/SAFETY EQUIP section.