LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1997 >> Jimmy 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System - Remote >> Testing >> Rear Liftgate Window Release

Rear Liftgate Window Release

NOTE: To prevent damage to terminal, connector Test Adaptor Kit (J 35616-A) must be used whenever a diagnostic procedure requires checking or probing a terminal. To locate and identify terminals, see WIRING DIAGRAMS  .
  1. Press rear endgate window release switch. If window releases, go to next step. If window does not release, see POWER REAR WINDOW/LIFTGATE RELEASE article.
  2. Place transmission in Park (A/T) or set parking brake (M/T). Disconnect remote control door lock receiver 16-pin connector. Connect fused jumper wire between ground and remote control door lock receiver 16-pin connector terminal "L" (Black/White wire). If endgate window releases, replace remote control door lock receiver. If endgate window does not release, repair open circuit in Black/White wire between remote control door lock receiver and rear window release solenoid.
scientia non olet · About LEMON Manuals