LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1997 >> Forward Control 5.7 R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Controls - Basic Testing - 5.7L) >> C-4, Basic Ignition System Checks >> HEI-Est Distributor >> Distributor Pick-Up Coil Short & Resistance Checks

Distributor Pick-Up Coil Short & Resistance Checks

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1996 Chevrolet Chevy Van, 1995 GMC Yukon, 1995 GMC Vandura Special, 1995 GMC Vandura, and 1995 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect pick-up coil leads from module. Using ohmmeter, check pick-up coil resistance. Connect ohmmeter to distributor housing and either pick-up coil lead (step 1 in illustration). See Fig 1. Flex pick-up coil leads by hand to check fo r intermittent short to ground. If reading is not always infinite, replace pick-up coil.
  2. Connect ohmmeter between pick-up coil leads (step 2 in illustration). See Fig 1. Check for intermittent open by flexing wire s and connectors. If resistance is not 500-1500 ohms, replace pick-up coil.
Fig 1: Checking HEI-EST Distributor Pick-Up Coil
G93I76560Courtesy of GENERAL MOTORS CORP.