LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1996 >> Jimmy 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Removal & Installation >> Inflator Module >> Removal

Inflator Module: Removal

  1. Before proceeding, follow air bag service precautions. Refer to SERVICE PRECAUTIONS  . Disable the air bag restraint system. See DISABLING & ACTIVATING SIR SYSTEM  .
  2. Turn steering wheel 90 degrees to access rear shroud holes to inflator module. Insert screw driver and push leaf spring to release pin. Turn steering wheel 180 degrees to access remaining rear shroud holes. Insert screw driver and push leaf spring to release pin. Remove inflator module. Disconnect SIR lead wire from clip on inflator module and steering wheel. Remove CPA clip and retainer from inflator module. See Fig 1 .
Fig 1: Removing Driver-Side Inflator Module
G96J05950Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals