ENDGATE Lock Switch Does Not Activate Liftgate Release Solenoid
- Disconnect endgate lock switch connector. Connect test light between endgate lock switch connector Orange wire and ground. If test light comes on, go to next step. If test light does not come on, repair open circuit in Orange wire.
- Unlock left front door. Place Automatic Transmission (A/T) in Park or Neutral. For Manual Transmission (M/T), set parking brake. Momentarily connect fused jumper wire between endgate lock switch connector Orange and Black wires. If liftgate release solenoid does not activate, go to next step. If liftgate release solenoid activates, replace endgate lock switch.
- Reconnect endgate lock switch connector. Disconnect driver's door lock key switch connector. Connect test light between driver's door lock key switch connector Black wire and ground. Press endgate lock switch. If test light comes on, go to next step. If test light does not come on, repair open circuit in Black wire.
- Connect fused jumper wire between driver's door lock key switch connector Black/White and Black wires. Press endgate lock switch. If liftgate release solenoid activates, replace driver's door lock key switch. If liftgate release solenoid does not activate, repair open circuit in Black/White wire.