LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1996 >> Forward Control 4.3 W >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - P Series (Gasoline) >> Fuel System >> Fuel Pump >> Removal & Installation

Removal & Installation

  1. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE  RELIEF (CSI or SFI) under FUEL SYSTEM. Disconnect negative battery cable. Raise vehicle and remove fuel tank. Using Sending Unit Remover (J-36608 or J-24187), remove sending unit and pump by turning cam lock counterclockwise.
  2. Remove fuel pump from sending unit by pulling pump up into attaching hose while pulling outward from the bottom support. DO NOT damage rubber insulator or strainer. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals