LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Jimmy 4D Utility, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Shift Linkage

Shift Linkage

  1. Ensure shift tube and lever are free in steering column. To adjust linkage, remove screw and spring washer from swivel. Turn transmission lever clockwise to stop, then counterclockwise 2 detents. This is Neutral position.
  2. Place selector lever in Neutral. Locate proper position using mechanical stops, NOT shift indicator pointer. Hold swivel against shift lever. Install spring washer and screw. Tighten finger tight. Avoid applying force in either direction (along shift rod or lever) while tightening screw to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals