Fuel Cylinder Control Valve: Installation
WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Apply Parker O-Lube(R) to NEW "O" ring, and install "O" ring on fuel cylinder control valve. Install control valve. Loosen cylinder strap, and rotate cylinder until control valve is in horizontal position. Tighten cylinder strap bolts.
- Apply Parker O-Lube(R) to NEW "O" ring, and install "O" ring on fuel gauge pressure sensor. Install pressure sensor and sensor harness connector. Connect fuel tube, and check for proper tightness using go/no-go gauge. See FUEL TUBES & FITTINGS . Install cylinder guard, and tighten bolts.