LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1994 >> Yukon 6.5 S >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Removal & Installation >> Window Glass >> Installation

Window Glass: Installation

  1. Install glass into the channel. Fold the tab on the channel up.
  2. Install module and glass assembly into the bottom of the door. First fit the glass into the rear channel in the door. Fit the glass into the front run channel while pulling the channel toward the glass.
  3. Install upper front run channel bolt.
  4. Connect lock rods to module.
  5. Connect boot over the wiring harness from the door to the body.
  6. Connect wiring to the connector inside the door hinge pillar.
  7. Install lower front run channel bolt.
  8. Install lock rods to the module.
  9. Install new water deflector. Refer to WATER DEFLECTOR  .
  10. Install module to door screws, starting with the top front and top rear screws. Tighten the lower front run channel screw.
  11. Install door trim panel. Refer to DOOR TRIM PANEL  .
scientia non olet · About LEMON Manuals