LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1994 >> Forward Control 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Drive Axle Ratio Identification) >> Identification >> DANA Built Axles

DANA Built Axles

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 1993 Oldsmobile Bravada, 1993 GMC Yukon, 1993 GMC Vandura Special, 1993 GMC Vandura, and 1993 GMC Value Van. However, it is still accessible from the selected car via links, so may be relevant.

Identification code is stamped on rear surface of right axle tube. In addition, the 3-digit axle code appears on tape strip attached to outboard end of axle tube.

NOTE: Drive axles are balanced with pinion flange (acts as a harmonic member to reduce driveline vibration). If ring and pinion gear set, pinion flange assembly or pinion bearings need replacement, replace entire axle assembly using appropriate system-balanced service axle assembly.
scientia non olet · About LEMON Manuals