Disassembly (Throttle Body Cover Model 220)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1994 GMC Yukon, 1994 GMC Suburban, 1994 GMC Pickup, 1994 GMC Cab & Chassis, and 1994 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Place throttle body on Holding Fixture (J-9789-118 or BT-30-15) to prevent damage to throttle valve. Remove cover-to-throttle body screws (note location of 2 short screws). Remove throttle body cover. See Figure. Throttle body cover and pressure regulator are serviced as an assembly. DO NOT remove pressure regulator-to-cover screws.
- Remove TP sensor, IAC, fuel injectors, fuel filter, rubber parts, and diaphragms. Clean all remaining (metal) parts in a cold immersion-type cleaner such as Carbon X (X-55). Blow dry with compressed air. Inspect mating surfaces for damage which may prevent gasket sealing. Repair or replace faulty components.