LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1994 >> Forward Control 7.4 N >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Tests W/Codes - 7.4L >> Trouble Code Charts >> Code 43, Knock Sensor W/O Spark Module (Single Sensor) - A/T >> Notes

Code 43, Knock Sensor W/O Spark Module (Single Sensor) - A/T: Notes

NOTE: Test numbers refer to test numbers on diagnostic chart.
  1. Code 43 will set when vehicle reaches normal operating temperature (but not overheating), high engine load is indicated by MAP sensor and voltage on circuit No. 496 is greater than 3.5 volts DC or less than 1.5 volts DC. This step determines if system is functioning properly at current time.
  2. This step determines state of 5-volt reference signal applied to sensor.
  3. Checks knock sensor internal resistance.
scientia non olet · About LEMON Manuals