LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1994 >> Forward Control 4.3 Z, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Remove/Install/Overhaul) >> Fuel System (Gasoline) >> Fuel Pump >> Removal & Installation (All Models)

Removal & Installation (All Models)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1994 GMC Yukon, 1994 GMC Suburban, 1994 GMC Pickup, 1994 GMC Cab & Chassis, and 1994 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELIEF (TBI)  under FUEL SYSTEM (GASOLINE). Disconnect negative battery cable. Raise vehicle and remove fuel tank. Remove sender unit and pump by turning cam lock counterclockwise using Tool (J-36608 or J-24187).
  2. Remove fuel pump from sending unit by pulling pump up into attaching hose while pulling outward from the bottom support. DO NOT  damage rubber insulator or strainer. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals