LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1993 >> Forward Control 7.4 N >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Drive Axle Ratio Identification >> Identification >> DANA Built Axles

DANA Built Axles

Identification code is stamped on rear surface of right axle tube. In addition, the 3-digit axle code appears on tape strip attached to outboard end of axle tube.

NOTE: Drive axles are balanced with pinion flange (acts as a harmonic member to reduce driveline vibration). If ring and pinion gear set, pinion flange assembly or pinion bearings need replacement, replace entire axle assembly using appropriate system-balanced service axle assembly.
scientia non olet · About LEMON Manuals