Cruise Control Operation: Set

The cruise system is engaged by depressing the "SET" push button and then releasing it (slider switch must be in the "ON" position). The cruise speed will be the vehicle speed at the time the push button is released. This speed is stored in the cruise module's memory. The cruise system may be disengaged by moving the slider switch to the "OFF" position or by depressing the brake pedal (or clutch pedal). A momentary slider switch movement from the "ON" position to "R/A" will also operate as a "SET" mode function if the previous cruise speed has been cleaned from the module's memory. Memory is cleared by moving the slider switch to "OFF" or by turning the ignition switch to "OFF". The accelerator pedal may be depressed at any time to override the cruise system. Release of the accelerator will return the vehicle to the "SET" cruise speed.