Cruise Control Cable: Adjustment
- Unlock the cable conduit engine fitting. See Fig 1.
- For gasoline engines, move the cable conduit until the throttle body begins to open. Then move the conduit in the opposite direction enough to close the throttle body. Do not release hand grip from the cable until the cable conduit lock is in place.
- For diesel engines, move the cable conduit until the injection pump lever moves off the idle stop screw. Then move the conduit in the opposite direction enough to return the lever to the idle stop screw. Do not release hand grip from the cable until the cable conduit lock is in place.
- On all engines, while holding the cable conduit, push down firmly on the cable conduit lock until it snaps in place.
Courtesy of GENERAL MOTORS CORP.