Fuel Pressure Release
WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, 1995 Dodge Dakota, and 1995 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel pressure must be fully released before opening fuel system or removing any fuel-carrying components. To release pressure in tank, open fuel tank cap slowly.
- To release remaining pressure in system, disconnect injector wiring harness. Using jumper wire, connect injector terminal No. 1 (Light Blue wire) to ground. Momentarily connect injector terminal No. 2 (Dark Green/Orange) to positive battery terminal with second jumper wire.
- DO NOT apply power to injector for longer than 5 seconds. Remove jumper wires. This releases system pressure. Continue fuel system service.