LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1992 >> Forward Control 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Controls - Remove/Install/Overhaul - 5.2L Gasoline) >> Fuel System >> Fuel Injector Rails >> Installation

Fuel Injector Rails: Installation

WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate injector "O" rings with a drop of clean engine oil. Install injectors and clips into fuel rail receiver cups. Ensure injectors and clips are fully seated. Position fuel rail/injector assembly on intake manifold openings. Using care not to tear "O" rings, guide each injector into intake manifold. Push right and then left fuel rail down until injectors are bottomed on injector shoulder.
  2. To complete installation, reverse removal procedure. Connect negative battery cable, and check for leaks.
scientia non olet · About LEMON Manuals