Diagnostic Procedure

WARNING: This page is about a different car, the 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When using self-diagnostic tests for diagnosis, DO NOT skip any steps or incorrect diagnosis may result. Always start with TEST SC-1A .

Perform a visual inspection before attempting to diagnose engine control system problems. See VISUAL INSPECTION. Enter on-board diagnostics and retrieve fault codes. See ENTERING ON-BOARD DIAGNOSTICS. If fault codes are NOT present and/or DRB (Diagnostic Readout Box) is used, proceed to TEST SC-1A .