LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1992 >> Forward Control 6.2 J, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Cruise Control System) >> Diagnostic Tests >> Test SC-4B - Checking Speed Control Brake Switch Sense

Test SC-4B - Checking Speed Control Brake Switch Sense

WARNING: This page is about a different car, the 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Disconnect Powertrain Control Module (PCM) 60-pin connector. Check connector for damaged, pushed out or miswired terminals. Repair as necessary. Perform VERIFICATION TEST SC-VER  . If connector is okay, with DRB in ohmmeter mode, probe PCM connector terminal No. 29, brake switch sense circuit (White/Pink wire).
  2. If resistance is greater than 5 ohms, replace PCM. Perform VERIFICATION TEST SC-VER  . If resistance is less than 5 ohms, repair short to ground in White/Pink wire. Perform VERIFICATION TEST SC-VER  .
scientia non olet · About LEMON Manuals