Refilling & Bleeding System
- Fill reservoir to correct level. See RECOMMENDED FLUID table. Let oil settle for 2 minutes. Start engine and run for 4-5 seconds. Check reservoir. Add oil (if necessary). Repeat procedure until level in reservoir remains constant.
- Raise front of vehicle so that both wheels are off ground. Start engine and increase engine speed to 1500 RPM. Turn wheels right and left, lightly contacting stops. Check fluid level. Add fluid (if necessary).
- Lower vehicle. Turn wheels right and left. Check fluid level. Add fluid (if necessary). If oil is foamy, go to step 4).
- Allow vehicle to stand for a few minutes with engine off. Repeat steps 1) through 3), with front of vehicle raised. Again check fluid level and for air in system. If level is low or there is air in system, repeat complete procedure.
RECOMMENDED FLUID
| Application | Part Number Or Type |
|---|---|
| General Motors | P1050017 |