LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1987 >> Forward Control 6.2 J, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Gear - Power >> Overhaul >> Adjuster Plug >> Reassembly

Adjuster Plug: Reassembly

  1. Press roller bearing into adjuster plug (identification end facing arbor) until bearing bottoms on input shaft seal bore. Install input shaft seal with spring in seal facing adjuster plug.
  2. Install dust seal into adjuster plug. The rubber face of the seal must face away from plug. Install retainer ring and adjuster plug "O" ring.
  3. Assemble thrust bearing, thrust bearing race, and thrust bearing spacer on adjuster plug. Using a brass or wooden dowel, press bearing retainer into needle bearing bore.
scientia non olet · About LEMON Manuals