Disassembly (Fuel Meter Assembly Model 295)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1994 GMC Vandura Special, 1994 GMC Vandura, 1994 GMC Rally Camper Special, 1994 GMC Rally, and 1994 GMC Forward Control. However, it is still accessible from the selected car via links, so may be relevant.
- Place throttle body on Holding Fixture (J-9789-118 or BT-30-15) to prevent damage to throttle valve. Remove cover-to-throttle body screws (note location of 2 short screws). Remove throttle body cover. See Figure. If fuel pressure regulator cover is removed, regulator diaphragm must be replaced to prevent fuel leaks.
- Remove TP sensor, IAC, pressure regulator assembly, fuel injectors, fuel filter, rubber parts, and diaphragms. Clean all remaining (metal) parts in a cold immersion-type cleaner such as Carbon X (X-55). Blow dry with compressed air. Inspect mating surfaces for damage which may prevent gasket sealing. Repair or replace faulty components.