LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1986 >> Safari Van Passenger, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Wheel Alignment Specifications

Wheel Alignment Specifications

CASTER, CAMBER & TOE-IN (G30 SERIES) (1)

Dimension (Inches) "BC" (2) (3) Caster°
1.50 3.094
1.62 3.034
1.75 2.967
1.88 2.800
2.00 2.667
2.12 2.500
2.25 2.367
2.38 2.233
2.50 2.100
2.62 1.967
2.75 1.833
2.88 1.633
3.00 1.500
3.12 1.367
3.25 1.233
3.38 1.117
3.50 0.967
3.62 0.833
3.75 0.700
3.88 0.583
4.00 0.450
4.12 0.333
4.25 0.200
4.38 0.100
4.50 0.033
(1) Use this table in conjunction with CASTER, CAMBER & TOE-IN ALIGNMENT SETTING TOLERANCES table. Nominal Camber setting is 0.25°. Nominal total toe-in is .18' or 36°.
(2) See dimension "BC" in Figure .
(3) See WHEEL ALIGNMENT SPECIFICATIONS  table.
CASTER, CAMBER & TOE-IN (G10/20 SERIES) (1)

Dimension (Inches) "BC" (2) (3) Caster°
1.50 3.417
1.62 3.317
1.75 3.217
1.88 3.100
2.00 3.000
2.12 2.950
2.25 2.850
2.38 2.750
2.50 2.667
2.62 2.567
2.75 2.480
2.88 2.400
3.00 2.330
3.12 2.317
3.25 2.150
3.38 2.066
3.50 2.000
3.62 1.880
3.75 1.800
3.88 1.730
4.00 1.667
4.12 1.600
4.25 1.530
4.38 1.467
4.50 1.400
(1) Use this table in conjunction with CASTER, CAMBER & TOE-IN ALIGNMENT SETTING TOLERANCES table. Nominal Camber setting is 0.50°. Nominal total toe-in setting is .18" or 36°.
(2) See dimension "BC" in Figure .
(3) See WHEEL ALIGNMENT SPECIFICATIONS  table.
CASTER (1) , CAMBER (1) & TOE-IN (K10/30 SERIES) (2)

Dimension "BC" (3) Caster Camber (4) (4) Total Toe-In
2.50" thru 5.88" +8° (6) +1°30 (5)(6) 0 (6)
(1) Specifications are for reference only. No means of adjustment are provided.
(2) Use this table in conjunction with CASTER, CAMBER & TOE-IN ALIGNMENT SETTING TOLERANCES table.
(3) See dimension "BC" in Figure .
(4) See WHEEL ALIGNMENT SPECIFICATIONS  table.
(5) The conversion of +1° 30" (minutes) to decimal of degrees equals 1.50°.
(6) Nominal.
CASTER, CAMBER & TOE-IN (C10 SERIES) (1)

Dimension (Inches) "BC" (2) (3) Caster °
2.50 3.65
2.62 3.55
2.75 3.45
2.88 3.30
3.00 3.15
3.12 3.00
3.25 2.85
3.38 2.75
3.50 2.60
3.62 2.45
3.75 2.35
3.88 2.20
4.00 2.05
4.12 1.90
4.25 1.75
4.38 1.65
4.50 1.50
4.62 1.35
4.75 1.25
4.88 1.10
5.00 1.00
5.12 0.90
5.25 0.75
5.38 0.60
5.50 0.50
5.62 0.35
5.75 0.25
5.88 0.15
6.00 0
(1) Use this table in conjunction with CASTER, CAMBER & TOE-IN ALIGNMENT SETTING TOLERANCES table. Nominal Camber section is 0.70°. Nominal total toe-in setting is .18" or 36°.
(2) See dimension "BC" in Figure .
(3) See WHEEL ALIGNMENT SPECIFICATIONS  table.
CASTER, CAMBER & TOE-IN (C20/30 SERIES) (1)

Dimension (Inches) "BC" (2) (3) Caster °
2.50 1.507
2.62 1.370
2.75 1.224
2.88 1.061
3.00 0.928
3.12 0.766
3.25 0.612
3.38 0.474
3.50 0.328
3.62 0.186
3.75 0.114
3.88 0.046
4.00 -.011
4.12 -.084
4.25 -.152
4.38 -.605
4.50 -.746
4.62 -.866
4.75 -.999
4.88 -1.126
5.00 -1.246
5.12 -1.350
5.25 -1.440
5.38 -1.542
5.50 -1.638
5.52 -1.747
5.75 -1.849
5.88 -1.944
(1) Use this table in conjunction with CASTER, CAMBER & TOE-IN ALIGNMENT SETTING TOLERANCES table. Nominal Camber setting is 0° 15' (.25°). Nominal total toe-in setting is .36".
(2) See dimension "BC" in Figure .
(3) See WHEEL ALIGNMENT SPECIFICATIONS  table.
CASTER, CAMBER & TOE-IN ALIGNMENT SETTING TOLERANCE (1)

Application Check Re-Set
Caster (2) +1.00° (3) +0.50° (4)
Camber (2) +0.75° (3) +0.50° (4)
Total +.12" +.06"
Toe-In (2) +.232° +.116°
(1) Use this table in conjunction with appropriate CASTER, CAMBER TOE-IN tables.
(2) See WHEEL ALIGNMENT SPECIFICATIONS  table.
(3) Left and right to be equal within 1.00°.
(4) Left and right to be equal within 0.50°.
WHEEL ALIGNMENT SPECIFICATIONS

Application Specification
Axle Gap (Inches) N/A
Caster (Degrees) 2.2 to 3.2
Camber (Degrees) 1.4 to 0.4
Toe-in (Inches) (1)
Steering Axis Inclination (Degrees) N/A
(1) Toe-in on these vehicles is 0.1° to 0.2° per wheel.
scientia non olet · About LEMON Manuals