Set/Coast Switch

The set/coast switch is located on end of turn signal lever and has 2 positions, normal and depressed.

SET Position

With vehicle speed above 25 MPH and with cruise control switch in "ON" position, depress and release set/coast switch. Speed will be set at the speed the vehicle was in when button was released. Speed will be maintained until cruise control switch is turned off, ignition is turned off or set/coast switch is fully depressed and held. Depressing brake or clutch pedal (man. trans.) releases cruise control, but not resume capability.

COAST Position

With set/coast switch fully depressed, control speed may be raised or lowered. To increase speed: accelerate to new speed, fully depress set/coast switch and release. New speed is set when switch is released. To decrease speed: depress and hold set/coast switch, when vehicle has slowed to desired speed, release switch to set new speed.

Tap-Down Position

With cruise control engaged and operating, tap-down vehicle speed by quickly depressing and releasing set/coast switch. Do not hold switch in depressed position as it will place system in coast mode. This feature decreases vehicle speed by approximately 1 MPH for every tap, down to 25 MPH.